free templates joomla

Super Team

Error
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING

Superchargers & Accessories

 Blower Case nbr 300

Supercharger Cases & Hardware, Top Fuel 14-71 only.

26Z-610

Billet Supercharger Case, for 14-71 PSI Top Fuel, Stg II w/ 10.5" long top opening. (Does not include: Stuffer Plate #26Z-700 or #26Z-650 End Frame Bolts).(each)

26Z-650

5/16-18 x 1.750" 12pt Bolt, Black oxide w/ .620" flange. For Blower end frames, AJPE Billet Cases only! Requires 36 bolts per case. (each)

23Z-100-139

.139" Dia Buna N Cord material. (per ft.) AJPE TF Supercharger case top opening uses .139” cord x 39” long, case front & rear use .139” cord x 28” each.

23Z-100-210

.210" Dia Buna N Cord material. (per ft.) AJPE TF Supercharger case bottom opening uses .210” cord x 38” long cord.

 

 

Stuffer Plates 1 nbr  170 x 103

 

Stuffer Plates & Hardware, AJPE cases only.

26Z-701-1000-R3

Supercharger Stuffer Plate: Stg II w/10.00" Top opening (no slot), Sold with new Stg II AJ TF billet cases only. (each)

26Z-701-1050-R3

Supercharger Stuffer Plate: Stg II w/10.5" Top opening (no slot), Sold with new Stg II AJ TF billet cases only. (each)

26Z-701-1050-R3-S

Supercharger Stuffer Plate with Slot for injector riser fin: Stg II w/10.5" Top opening w/ Rev 3, for Stg II AJ TF billet cases. Includes hardware. (ea)

26Z-750

10-24 x 3/8" Socket Head Cap Screw. (each)

26Z-760

Stud: 1/4 x 1.00" C-F, .500" coarse x .400" fine. (each)

26Z-761

Stud: 1/4 x .800" C-F, .300" coarse x .400" fine. (each)

 

Blower Studs  nbr  170 x 126

 

Blower Stud Kits & Related Parts

26Z-090

Blower Stud Kit w/ Nuts + Washers- Blue Studs, 2.900" OAL (2.200" protrudes above manifold surface)(kit)

26Z-091

Blower Stud Kit w/ Nuts + washers - Red Studs, 2.500" OAL (1.625" protrudes above manifold surface) (kit)

26Z-095

Blower Stud & Nut Kit for PSI Screw Supercharger only. Not for Roots blowers. Includes: 8 ea Black studs 2.375" long & 8ea Jet Nuts. (kit)

26Z-092

Blower Stud Only - Red Aluminum 2.500" OAL (1.625" protrudes above manifold surface) (each)

26Z-093

Blower Stud Only - Black Aluminum 2-3/8" OAL (1.650" protrudes above manifold surface) (each)

26Z-094

7/16-20 Jet Nut with captured washer. (each)

 

 

AJPE TF Blower Studs, NHRA TF Approved 7075 Aluminum

26Z-092-437-500-300

7075 Blower Studs, AJPE. Plain Aluminum: 7/16-20 x 1/2-13 x 2.570" oal x .300" undercut shoulder dia. (1.750" protrudes above manifold surface) (each)

26Z-092-437-STI-300

7075 Blower Studs, AJPE. Plain Aluminum: 7/16" x 7/16 STI thread x 2.570" oal x .300" undercut shoulder dia. (1.750" protrudes above manifold surface) (each)

 

 Inj Riser  nbr  300 x 109

Injector Risers & Spacer Plates

26Z-800

Injector Spacer Plate, Thin. 10.5” opening, No Fin. AJ Top Fuel. (each)

26Z-815

Injector Riser Plate, 1.50" Tall, 10.5” opening, No Fin. Black anodized. AJ Top Fuel. (each)

26Z-820

Injector Riser Plate, 2.00" Tall, 10.5” opening, No Fin. Black anodized. AJ Top Fuel. (each)

26Z-821

Injector Riser Plate, 2.00" Tall, REV A 10.5" opening, with "Fin". Black anodized. (each)

 

Set Back Plate nbr  300 x 145

 

Set Back Plates & Related Parts

26Z-050

Kobelco Superman 1471 Blower Set-Back Plate Assembly, 481- X Pro Mod w/1.25" Set Back. Includes CS bolts + O-Ring cord. (each)

26Z-051

SSI Blower Set-Back Plate Assembly, aka 2-1/4" Set Back plate. Includes CS bolts + O-Ring cord. (each) (each)

26Z-040-CUSTOM

Blower Set-Back Plate Assembly, Custom per customer specs. Includes C-S bolts + O-Ring cord. (each)

00Z-051

7/16-14 x 1-1/4" - Flat Head Socket Cap Screw, use for the Supercharger Spacer / Set back Plates. Req: 8ea. (each)

 

 

Restraint Plates

26Z-900

Blower Restraint Plate, Lower. For AJPE Billet Blower Cases. (each)

 

 

Blower Belts

Blower Belts

26Z-1595-75

1595-75 145t 11mm   Kevlar Belt Polychain GT2 PS Series, 2.925" Wide (each)

26Z-1595-84

1595-84 145t 11mm   Kevlar Belt Polychain GT2 PS Series, 3.325" Wide (each)

26Z-1600-75PS

1600-75PS 200t   8mm   Kevlar Belt GT Profile, 2.95" Wide (each)

26Z-1610-65

1352-1610-65 115t 14mm   Kevlar Belt HTD Profile,   2.56" Wide (each)

26Z-1610-75

1352-1610-75 115t 14mm   Kevlar Belt, HTD Profile, 2.95" Wide. (each)

26Z-1694-65

1694-65 121t 14mm   Kevlar Belt HTD Profile 2.56" Wide (each)

26Z-1694-75

1694-75 121t 14mm   Kevlar Belt HTD profile 2.95" Wide (each)

26Z-1705-75-PS

1705-75 155t 11mm   Kevlar Belt, Polychain GT2 PS series., 2.925" Wide. PS style "Purple" belt. (each)

26Z-1705-84-PS

1705-84 155t 11mm   Kevlar Belt Polychain GT2 PS series, 3.325" Wide. PS style "Purple" belt. (each)

26Z-1750-75

1750-75PS 125t 14mm   Kevlar Belt, 2.95" Wide (each)

26Z-1778-65

1778-65 127t 14mm   Kevlar Belt, 2.95" wide (each)

26Z-1778-75

1778-14mm-GT-75 Kevlar Belt (each)

26Z-1792-75

1792-75PS 224t 8mm   Kevlar Belt GT Profile, 2.95" Wide (each)

 

 

Snout Supports  nbr  170 x 100

Blower Snout Supports

26Z-300

QRS Snout Support Set: includes 1ea Long + Short support arms. (set)

 

 

Blower Lube & Cleaner

26Z-100-1886-LUBE

Supercharger Gel Lube, 13oz can. DMPE #100-99-1086 (Note: Gnd Ups shipping only!) (each)

26Z-100-1887-CLNR

Supercharger Gel Lube Cleaner, 13oz can. DMPE #100-99-1087 (Note: Gnd Ups shipping only!) (each)