free templates joomla

Super Team

Muscle Head Hemi Rockers + Parts

 

 

 

M-H IV Rockers partial nbr  500 x 224

 

 

M-H IV Rockers Assy nbr  500 x 168

 

Stg IV Muscle Head Hemi Rocker Stands & Hardware

06A-450-SET

Muscle Head Hemi Stg IV Rocker Stand Set, includes 10 rocker stands, no hardware. (set)

06A-451-DL

Muscle Head Hemi Stg IV Dog Leg End Rocker Stand. M-H Stg VI only. 2ea per set. (each)

06A-452-END

Muscle Head Hemi Stg IV Straight End Rocker Stand. M-H Stg VI only. 2ea per set. (each)

06A-453-C

Muscle Head Hemi Stg IV Center Rocker Stand. M-H Stg VI only. 6ea per set. (each)

06A-410-KIT

Muscle Head Stg IV Rocker Stand Stud & Nut Kit. Includes 30 ea studs & nuts. (kit)

06A-400-3790-S

M-H Hemi Stg IV 7/16-14 x 7/16-20 x 3.790" Rocker Stand Stud with .467" shoulder. Black oxide coated, w/ 5/16" male hex. Requires 20 per engine set. (each)

06A-400-4850-NS

M-H Hemi Stg IV 7/16-14 x 7/16-20 x 4.850" Rocker Stand Stud, Black oxide coated, w/ 5/16" male hex. Req. 8 per engine set. (Straight stud, no shoulder)(each)

06A-400-5880-NS

M-H Hemi Stg IV 7/16-14 x 7/16-20 x 5.880" Rocker Stand Stud, Black oxide coated, w/ 5/16" male hex. Req. 2 per engine set. (Straight stud, no shoulder)(each)

00Z-015

7/16 12pt Nut

06A-041-MH-REID

Muscle Head Hemi Intake Rocker Shaft, with 5/16" bolt holes. Reid .XXX" thick wall 4130 Steel, incl oil plugs. XX-X/X" oal. (each)

06A-051-MH-REID

Muscle Head Hemi Exhaust Rocker Shaft, with 5/16" bolt holes. Reid .XXX" thick wall 4130 Steel, incl oil plugs. XX-X/X" oal. (each)

06A-420-BOLT-KIT

Muscle Head Stg IV Rocker Shaft Bolt Kit, includes 2ea 5/16-18 x 1.500” & 18ea 5/16-18 x 1.750” Socket head cap screws. (kit)

00Z-SHCS-516-18-1500

5/16-18 x 1.500” Socket Head Cap Screw. (each)

00Z-SHCS-516-18-1750

5/16-18 x 1.750” Socket Head Cap Screw. (each)

06A-060M-1

TF Hemi Rocker Shaft Shims, .016" thick. Manton (each)

06A-060M-16

TF Hemi Rocker Shaft Shims, .016" thick. Manton (set/16)

06A-060M-48

TF Hemi Rocker Shaft Shims, .016" thick. Manton (set/48)

06A-065M-L-1

TF Rocker Shaft Spring, Long, 3.125" oal. (each)

06A-065M-S-1

TF Rocker Shaft Spring, Short, 2.125" oal. (each)

06A-065M-Set

TF Rocker Shaft Spring Set, contains 2ea "Short" springs & 14ea "Long" springs (set)

 

Stg IV Muscle Head Reid Machine Rockers & Hardware

06A-025-REID-175-716

Reid Muscle Head Hemi 1.75 ratio Intake Rocker Arm. Does not include Adjuster & Nut. (eac

06A-025-REID-180-716

Reid Muscle Head Hemi 1.80 ratio Intake Rocker Arm. Does not include Adjuster & Nut. (each)

06A-035-REID-160-716

Reid Muscle Head Hemi 1.60 ratio Exhaust Rocker Arm. Does not Include: Adjuster & Nut. (each)

06A-035-REID-170-716

Reid Muscle Head Hemi 1.70 ratio Exhaust Rocker Arm. Does not Include: Adjuster & Nut. (each)

06A-076-REID-OIL

7/16" Rocker Adjuster w/ 3/8" Ball. With Oil Hole, Reid. (each)

06Z-015-716

7/16" 12 Pt Nut - Modified w/ .620" OD flange. For Manton Hemi Rockers / Rocker Adjusters. (each)

 

M-H TD rockers 300

 

Muscle Head Hemi T&D Rocker Assemblies, Stg I-III

06A-002-170-165

T&D Muscle Head Rocker Assembly, 1.70 Intake x 1.65 Exhaust Ratios, w/ 5/16" studs. (Requires 2 boxes to make V-8 set!) (assy)

06A-002-180-165

T&D Muscle Head Rocker Assembly, 1.80 Intake x 1.65 Exhaust Ratios, w/ 5/16" studs. (Requires 2 boxes to make V-8 set!) (assy)

06A-003-170-165

T&D Muscle Head Rocker Assembly, 1.70 Intake x 1.65 Exhaust Ratios, w/ 11/32" studs. (Requires 2 boxes to make V-8 set!) (assy)

06A-003-180-165

T&D Muscle Head Rocker Assembly, 1.80 Intake x 1.65 Exhaust Ratios, w/ 11/32" studs. (Requires 2 boxes to make V-8 set!) (assy)

 

Muscle Head Hemi T&D Rocker Arms, Stg I-III

06A-025-170-B

T&D Muscle Head Hemi 1.70 ratio Intake Rocker Arm. Incl: Rocker Arm, Ret Clips, Adjuster & Nut. Does not include rocker shaft. (each)

06A-025-180-B

T&D Muscle Head Hemi 1.80 ratio Intake Rocker Arm. Incl: Rocker Arm, Ret Clips, Adjuster & Nut. Does not include rocker shaft. (each)

06A-035-165-B

T&D Muscle Head Hemi 1.65 ratio Exhaust Rocker Arm. Incl: Rocker Arm, Ret Clips, Adjuster & Nut. Does not include rocker shaft. (each)

06A-035-170-B

T&D Muscle Head Hemi 1.70 ratio Exhaust Rocker Arm. Incl: Rocker Arm, Ret Clips, Adjuster & Nut. Does not include rocker shaft. (each)

 

Muscle Head Hemi T&D Rocker Arm Parts, Stg I-III

06A-045

Muscle Head T&D Rocker Shaft only, Intake & Exhaust rockers. W/ 5/16" stud holes on 3.465" centers, 3.985" OAL.(each)

06A-045-1132

Muscle Head T&D Rocker Shaft only, Intake & Exhaust rockers. W/ 11/32" stud holes on 3.500" centers, 4.100" OAL.(each)

06Z-070

5/16" Rocker Shaft Hold Down Stud, 1.900" OAL. For T&D rocker shafts w/5/16" holes, also AJPE 4.9 + 5.0 PS rocker shafts. (each)

06Z-070-1132

11/32" Rocker Shaft Hold Down Stud, 1.900" OAL. For T&D MH Hemi rocker shafts w/ 11/32" holes. (each)

06Z-015-0516

5/16" 12 Point Nut - Modified w/ .445" OD flange. For 5/16" Rocker shaft studs (each)

06Z-015-1132

11/32" 12 Point Nut - Modified w/ .500" flange. For 11/32" Rocker shaft studs (each)

06Z-085-030-TD

T&D .030" Thick x 1.00" OD Shim Washer, for T&D 5/8" rocker shafts. (each)

06Z-085-035-TD

T&D .035" Thick x 1.00" OD Shim Washer, for T&D 5/8" rocker shafts. (each)

06Z-085-050-TD

T&D .050" Thick x 1.00" OD Shim Washer, for T&D 5/8" rocker shafts. (each)

06Z-090

Retaining ring, for all T&D rocker shafts, requires 2 per rocker arm. (each)

06Z-055

Tip Roller, Shaft and Clip Assembly. T&D "Circlip" style for AJ Billet Aluminum Rockers. 1.055" oal. (each)

06Z-055-1

Tip Roller, Shaft and Clip Assembly with Needle Bearing   T&D "Circlip" style for AJ Billet Aluminum Rockers. 1.055" oal. (each)

06Z-055-CLIP

Clip for T&D Tip roller axle. (each)

06Z-057

B-108 Rocker Shaft Bearing, .625" ID x .500" Wide, Full Complement. (each)

06Z-057-SCE-108

INA SCE-108 Rocker Shaft Bearing, .625" ID x .500" Wide, Caged style. (each)

06Z-057-WIDE

B-1012 Rocker Shaft Bearing, .625" ID x .750" Wide, Full Complement. (each)

 

Rocker Adjusters & Nuts, T&D Rockers

06Z-058

7/16" Rocker Adjuster w/ 5/16" cup. Non "through hole" adjuster. 1.130" OAL x 5/16" Cup, w/ interupted threads. (each)

06Z-058-S

Rocker Adj, 7/16 Shouldered, "Short" style: 1.130" OAL x 5/16" Cup. Use for 481-X Steel rockers, and "Early" BBC & MH T&D rockers only. Std oiling. (each)

06Z-058-S-38

Rocker Adj, 7/16 Shouldered, "Short" style: 1.130" OAL x 3/8" Cup. Optional for 481-X Steel rockers, and "Early" BBC & MH T&D rockers only. Std oiling. (each)

06Z-058-S-LONG

Rocker Adjuster, 7/16 Shouldered, "Long" style: 1.235" OAL x 5/16" cup. For "Late" MH T&D rockers only. Std oiling, not "through hole" style. (each)

06Z-016

7/16" 12 Point Light Weight Adjuster Nut (each)

 

Muscle Head Hemi T&D Rocker Stands & Parts, Stg I-III

06A-350-516

Muscle Head Hemi T&D Rocker Stand only, for 5/16" rocker studs. Incl: washer ins & oil plugs/rest. only, does not include rocker studs or rocker arms. (each)

06A-350-1132

Muscle Head Hemi T&D Rocker Stand only, for 11/32" rocker studs. Incl: washer ins & oil plugs/rest. only, does not include rocker studs or rocker arms. (each)

06A-310

Muscle Head Rocker Stud & Nut Kit: incl 10 ea stepped/shouldered studs, 10 ea straight studs, & 20 ea nuts. (kit)

06A-300

Muscle Head Hemi 3/8" Straight Rocker Stand Stud, 3.050" oal including .220" starter nose. (each)

06A-301

Muscle Head Hemi 3/8" Stepped/Shouldered Rocker Stand Stud, 3.010" oal including .220" starter nose. (each)

06A-300-3550

Muscle Head Hemi 3/8" x 7/16 x 3.550" Stepped Stud. Repair /retro fit stud for Straight Rocker Stand Stud (each)

00Z-017-S

3/8" x 1/2" -12 point Nut, fits 1/2" 12pt wrench. (each)

06Z-070

5/16" Rocker Shaft Hold Down Stud, 1.900" OAL. For T&D rocker shafts w/5/16" holes, also AJPE 4.9 + 5.0 PS rocker shafts. (each)

06Z-070-1132

11/32" Rocker Shaft Hold Down Stud, 1.900" OAL. For T&D MH Hemi rocker shafts w/ 11/32" holes. (each)

06Z-015-0516

5/16" 12 Point Nut - Modified w/ .445" OD flange. For 5/16" Rocker shaft studs (each)

06Z-015-1132

11/32" 12 Point Nut - Modified w/ .500" flange. For 11/32" Rocker shaft studs (each)

 

 

Top Fuel 426 Hemi Rocker Arms & Adjusters

06A-020-160-716

Stage V Hemi Intake Rocker Arm, 1.60 Ratio, 1.600" arm length, for use with 7/16" thread adjuster. Does not include adjuster or nut. (each)

06A-020-170-716

Stage V Hemi Intake Rocker Arm, 1.70 Ratio, 1.600" arm length, for 7/16" thread adjuster. Does not include adjuster or nut. (each)

06A-020-170-716-SO

Stage V Hemi Intake Rocker Arm, 1.70 Ratio, 1.600" arm length, for 7/16" thread adjuster. With special Oiling option.   Does not include adjuster or nut. (each)

06A-020M-180-716

Manton Hemi Intake Rocker Arm, 1.80 Ratio, 1.675" arm length. Includes 7/16" thread x 3/8" ball "Non-Oil Style" Adjuster & modified 7/16" 12pt Nut. (each)

06A-030-160-716

Stage V Hemi Exhaust Rocker Arm, 1.60 Ratio, for use with 7/16" thread adjuster. Does not include adjuster or nut. (each)

06A-075-OIL

7/16" Rocker Adjuster w/ 5/16" Ball. With Oil Hole, Manton. (each)

06A-076

7/16" Rocker Adjuster w/ 3/8" Ball, without Oil Hole. IRC (each)

06A-076-MANT

7/16" Rocker Adjuster w/ 3/8" Ball, without Oil Hole. Manton (each)

06A-076-OIL

7/16" Rocker Adjuster w/ 3/8" Ball. With Oil Hole, Manton. (each)

06Z-015-716

7/16" 12 Pt Nut - Modified w/ .625" OD flange. For Manton Hemi Rockers / Rocker Adjusters. (each)

06Z-016

7/16" 12 Point Light Weight Adjuster Nut (each)